Skip to main content
Insights into Imaging
Fig. 4 | Insights into Imaging

Fig. 4

From: Endovascular embolization techniques in acute thoracic and abdominal bleedings can be technically reproduced and trained in a standardized simulation setting using SLA 3D printing: a 1-year single-center study

Fig. 4

The 3D printing and simulation setup. This figure illustrates the concept of an in-house 3D print and simulation laboratory. A peristaltic pump, B SLA 3D printer, C Isopropyl-alcohol tank for cleaning of the 3D prints, D ultraviolet curing lamp, E monitor for 2D projection, F computer for segmentation, G smartphone camera on a tripod, H LED panel, I 3D printed vascular model, J 5-French introducer. Black arrows demonstrate the flow direction of the circulatory system

Back to article page