Skip to main content
Fig. 2 | Insights into Imaging

Fig. 2

From: Endovascular embolization techniques in acute thoracic and abdominal bleedings can be technically reproduced and trained in a standardized simulation setting using SLA 3D printing: a 1-year single-center study

Fig. 2

Connection system and pressure measurements. A Straight, Y- and T-shaped tube connectors (white) and the solid 3D printed funnel-shaped connectors in different dimensions. B A set of vascular models with chemically bonded connectors. C Physiological arterial pressure gradients of 110–80 mmHg were established in the 3D printed vascular models using the peristaltic pump. D Intravascular pressure measurements of the adaptable endovascular simulation system in the angiography suite. White arrow: 3D printed vascular model with introduced catheter. White arrowhead: 5-French introducer. Black arrows: Flow direction of the circulatory system

Back to article page