Fig. 1From: Endovascular embolization techniques in acute thoracic and abdominal bleedings can be technically reproduced and trained in a standardized simulation setting using SLA 3D printing: a 1-year single-center studyTechnical illustration of the adaptable endovascular simulation setup. A patient-specific 3D printed vascular model is connected via silicone tubes to a peristaltic pump to establish a closed pulsatile circulatory system. The 2D projection in angiography is simulated with a smartphone camera on a tripod projected on a monitor. A Lateral view, B top view, C 3D visualization. Units: mmBack to article page